Thread: Embarrassing trip today

Tweet

you should have the pin tomorrow .i just had order two of the arp bolts my self . the best i can do is get the tq specs tomorrow evening . 50 on a iron core cam is abit use thread locker on that bolt ..... a grade 8 .3/8 -16 is about 42 lb so the pro is past 180.000 so 50 about right .as for the damper would think 120 should work

Originally Posted by pat mccarthy

you should have the pin tomorrow .i just had order two of the arp bolts my self . the best i can do is get the tq specs tomorrow evening . 50 on a iron core cam is abit use thread locker on that bolt ..... a grade 8 .3/8 -16 is about 42 lb so the pro is past 180.000 so 50 about right .as for the damper would think 120 should work

Thanks Pat - and the cam is a roller and steel so 40-50 on the Pro bolt should work then. And that 5/8-18, 120# does sound reasonable for what I recall but CRS has taken over lots of stuff