Thread: adjusting a roller rocker shaft assy

Tweet

yep that or a very long valve in the head. wrong push rods they sent you ? the adjuster out to far on the rocker arms .i like to use a 210 pushrod tip .i check push rods with test springs .base cricle will throw things off push rods for a 700 lift cam can not be the same as a 600 lift cam . can be alot of small things that add up to a big thing but over 1/4 shim sounds abit off . that cam hyd ? roller ? solid? how are you checking mild lift with a hyd lifter you have to watch this you can push the valving down in the pushrod