Results 1 to 15 of 41
LinkBack URL
About LinkBacksThreaded View
-
04-10-2010 05:01 PM #21
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
Sorry Jerry, I missed your post. These are full floaters and they move extremely easily. I checked for locking clips not staying in and all that stuff, and they are fine. It just looks to me as if the increased stroke is for some reason pulling the piston to the 12 and 6 oclock side of each cylinder. Could it be too much piston to wall clearance? I can take a couple of them and very slightly move the piston up and down in the bore. Not a lot, just like it is moving on the rings a tad. By up and down I mean sideways in the bore.
DonLast edited by Itoldyouso; 04-10-2010 at 05:04 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy