Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Need our engine experts to help me out.
          
   
   

Results 1 to 15 of 41

Threaded View

  1. 04-10-2010 04:41 PM #16
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    well on all engine after boring i roll the lower bore so that will not happen i use a 80 grit flap wheel if you do not do this it will shave the pistons skirts the outer ring is loose but this will have a load on it as the fule pump arm is loaded
    Last edited by pat mccarthy; 04-10-2010 at 04:44 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink