Thread: 5.7 or 6.0 RODS?
Results 1 to 4 of 4
LinkBack URL
About LinkBacksThreaded View
-
09-27-2009 05:47 PM #3
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Scroll down here and read Tech Tip -2005, written by Iskenderian....
http://www.iskycams.com/techtips.php
Compare the wrist pin placement to the oil ring in this 5.7 rod piston....
http://kb-silvolite.com/performance....tails&P_id=212
With this piston using a 6.0 rod....
http://kb-silvolite.com/performance....tails&P_id=101
A spacer ring or other apparatus must be used to support the ends of the rails and expander as they rotate in the ring land. More stuff to go wrong in my opinion.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!