Thread: sbc aluminum intake
Threaded View
-
11-09-2003 03:26 PM #1
sbc aluminum intake
I have a sbc aluminum intake with the following information stamped in front of the carb; 14057063 and underneath this number is the letters; GM CFM and underneath that is the number; 42 This is a low-rise, dual-plane intake.
I cannot find this intake listed in any chevrolet small block intake listing. I would like to use this intake on a 350 c.i. "Goodwrench" engine equipped with a mid-range cam and a Q-jet.
I would like to know what engine/auto combination this intake came in from the manufacture. I believe that it was probably a Z28 or a Corvette, but I do not know. I want to use this engine to power my 1978 Nova Coupe, driven on the street, no racing, just a good engine with a lopey idle and good mid-range power.
I do not want to use this intake if it is not flow rated for my proposed application.mb
The last couple of weeks have been spent waiting on parts and getting the engine ready to put in the car. I found a manifold (turned out the guy I bought the center sump oil pan from had one). It’s...
1968 Plymouth Valiant 1st Gen HEMI