Thread: 350 olds question
-
08-06-2006 11:08 PM #1
350 olds question
I took my 350 olds motor apart and the tangs on the rods were in towards the inside of the block insted of towards the outside fo the block i have not built a oldsmobile engine all i have built is chevy motors so i need to know if it was assembled wrong or is that the way olds motors thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-07-2006 06:41 AM #2
[QUOTE=cutlassman_406]I took my 350 olds motor apart and the tangs on the rods were in towards the inside of the block insted of towards the outside fo the block i have not built a oldsmobile engine all i have built is chevy motors so i need to know if it was assembled wrong or is that the way olds motors thanks[/QUOTE What side was the chamfer toward?
-
08-07-2006 09:36 AM #3
there is no chemfer really its almost square thats why i thought i would ask because i dont want to screw anything up
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel