Printable View
I took my 350 olds motor apart and the tangs on the rods were in towards the inside of the block insted of towards the outside fo the block i have not built a oldsmobile engine all i have built is chevy motors so i need to know if it was assembled wrong or is that the way olds motors thanks
[QUOTE=cutlassman_406]I took my 350 olds motor apart and the tangs on the rods were in towards the inside of the block insted of towards the outside fo the block i have not built a oldsmobile engine all i have built is chevy motors so i need to know if it was assembled wrong or is that the way olds motors thanks[/QUOTE What side was the chamfer toward?
there is no chemfer really its almost square thats why i thought i would ask because i dont want to screw anything up:confused: