Thread: 350 olds question
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
08-06-2006 11:08 PM #1
CHR Member
- Join Date
- Jul 2006
- Location
- spokane
- Car Year, Make, Model: 68 olds cutlass
- Posts
- 49
350 olds question
I took my 350 olds motor apart and the tangs on the rods were in towards the inside of the block insted of towards the outside fo the block i have not built a oldsmobile engine all i have built is chevy motors so i need to know if it was assembled wrong or is that the way olds motors thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-07-2006 06:41 AM #2
CHR Member
- Join Date
- Aug 2004
- Location
- clive
- Car Year, Make, Model: BLOWN 540 57 CHEVY
- Posts
- 2,878
[QUOTE=cutlassman_406]I took my 350 olds motor apart and the tangs on the rods were in towards the inside of the block insted of towards the outside fo the block i have not built a oldsmobile engine all i have built is chevy motors so i need to know if it was assembled wrong or is that the way olds motors thanks[/QUOTE What side was the chamfer toward?
-
08-07-2006 09:36 AM #3
CHR Member
- Join Date
- Jul 2006
- Location
- spokane
- Car Year, Make, Model: 68 olds cutlass
- Posts
- 49
there is no chemfer really its almost square thats why i thought i would ask because i dont want to screw anything up
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project