Thread: 4-53 supercahrger help!!!

Tweet

Originally Posted by pat mccarthy

take a snapshot of it and load it on. so we can look at it you can make all the parts for it to work if you want . the intake may be tuff to get but you can make a plate to mount the blower on a standard tpy intake or tunnel ram

yeup!

Contact BDS, Blower Drive Service. They should be able to hook you up. Be prepared to spend some money, as you have only the first part of the entire puzzle.


www.blowerdriveservice.com/ - 16k


Don


PS: It may be a little small for a 360. If it is truly a 4-53 (could be, but I haven't heard of one either) that means it was designed for a 4 cylinder engine with 53 cubes per cyl. or about a 212 cubic inch engine.