Thread: restrictor plate?
Results 1 to 6 of 6
LinkBack URL
About LinkBacks-
03-19-2006 10:06 PM #1
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
restrictor plate?
my friends got a 850 that he wants to make a restrictor plate for. he wants to get the plate to restrict it to a 650-700cfm. how much smaller do the holes in the plate have to be compared to the carb?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-20-2006 08:15 AM #2
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
and how would i go about doing that?
and thanks man i appreciate it
-
03-20-2006 11:03 AM #3
CHR Member
- Join Date
- Jun 2005
- Location
- Eston
- Posts
- 2,270
Get a carb that's the right size, and leave the restrictor plates to the NASCAR boys. You won't be happy with the end result of a restricted carb.
-
03-20-2006 05:28 PM #4
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
hes going to eventually but right now this is all he has and he needs to get his car done
-
03-20-2006 05:59 PM #5
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
hes going to eventually but right now this is all he has and he needs to get his car done
Then just run it with the 850 for now. I ran 2 X 500 CFM Edelbrocks on my 302 for 7 years, and it was ok. Most he will get is a little carbon build up on the plugs.
Don
-
03-20-2006 06:02 PM #6
CHR Member
- Join Date
- Sep 2005
- Location
- Taylor
- Car Year, Make, Model: 86 Mark VII
- Posts
- 492
ok thanks
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project