my friends got a 850 that he wants to make a restrictor plate for. he wants to get the plate to restrict it to a 650-700cfm. how much smaller do the holes in the plate have to be compared to the carb?
Printable View
my friends got a 850 that he wants to make a restrictor plate for. he wants to get the plate to restrict it to a 650-700cfm. how much smaller do the holes in the plate have to be compared to the carb?
and how would i go about doing that?
and thanks man i appreciate it
Get a carb that's the right size, and leave the restrictor plates to the NASCAR boys. You won't be happy with the end result of a restricted carb.
hes going to eventually but right now this is all he has and he needs to get his car done
hes going to eventually but right now this is all he has and he needs to get his car done
Then just run it with the 850 for now. I ran 2 X 500 CFM Edelbrocks on my 302 for 7 years, and it was ok. Most he will get is a little carbon build up on the plugs.
Don
ok thanks