Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree17Likes
  • 1 Post By racerx1699
  • 3 Post By Matthyj
  • 5 Post By RichB
  • 6 Post By rspears
  • 1 Post By Matthyj
  • 1 Post By techinspector1

Thread: Mounting Steering Column
          
   
   

Results 1 to 10 of 10

Threaded View

  1. 04-08-2018 04:06 PM #6
    daveS53
    daveS53 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Feb 2013
    Location
    Loveland
    Posts
    427

    Lets see if this works. Under my dash is 1" square tube that is bolted to the frame at the bottom and to the 2" steel angles that support the door latch pins. The lower cross tube bolts to the vertical 2" angles with a single bolt at each end that allows the tube to rotate to match the lower edge of the dash. A support for the steering column drop mount is also welded to this cross tube.

    https://www.flickr.com/photos/155311...57694691139654
    Last edited by daveS53; 04-08-2018 at 04:15 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink