Build Thread - Daytona 3 Window Coupe

[daytonagary]

yes, this is a single line. I have used the multiple lines before and pulled the lines to be painted but this time I don't have that so will lay down 5 single lines of tape butting against each other and pull the two to be painted off so I get a perfect 1/8 inch width of the line everywhere. Also going to make a "32" in a break of the lines in middle of back of car. Will print out the "32" in the size and font I like on my computer, and use a knife to cut the numbers out of the paper, use tach spray on back of paper to stick it to the car so I have a perfect stencil to spray paint the "32" with.

[Dave Severson]

yes, this is a single line. I have used the multiple lines before and pulled the lines to be painted but this time I don't have that so will lay down 5 single lines of tape butting against each other and pull the two to be painted off so I get a perfect 1/8 inch width of the line everywhere. Also going to make a "32" in a break of the lines in middle of back of car. Will print out the "32" in the size and font I like on my computer, and use a knife to cut the numbers out of the paper, use tach spray on back of paper to stick it to the car so I have a perfect stencil to spray paint the "32" with.

FYI Gary, if you're having a tough time finding the old 3M tape with the pull outs for striping, Autobody Tool Mart keeps it in stock....Around here, none of the distributors stock it anymore.....

[rumrumm]

Nicely done, Gary. I, too, like the color choice. I am anxiously awaiting your future posts.