Thread: Planning on Full Fendered Deuce later

Tweet

Originally Posted by florida

Deuce,
Thanks for the heads up. The frame in your pictures shows the shock mount from the side of the frame and the lower 4 bar mount down low. In order to clear the fender the height and the angle of the shock mount must be taken into consideration too, right?

Yes, I just bought the complete front 4 bar suspension set up from TCI.
Most everything on my chassis came from TCI except I used the original 1932 Henry Ford frame rails that originally came under the coupe.





You can click on this

http://www.hotrodders.com/forum/jour...ge=1&reverse=1

and see a small photo journal of the construction of the 32 3W coupe.
There are a few non 3W related photos but it is mostly 1932 3W construction stuff.