Thread: Project American Graffiti Coupe
Results 136 to 150 of 277
LinkBack URL
About LinkBacks-
10-15-2009 04:14 PM #136
CHR Member
- Join Date
- Nov 2008
- Location
- Linden
- Car Year, Make, Model: Hemi powered 32 Ford 3 window
- Posts
- 23
You may know this already but just in case.....If you're using a standard Ansen or similar peddle assembly, don't forget to swap out the internals in that master cylinder. The Chevy unit has the brake internals (which includes a residual valve) on the left and the clutch internals (without a residual valve) on the right side. You need the brake valving on the right side with an Ansen setup so you'll have to remove the "C" clips and swap the internals side to side. Its a simple 5 minute job. That said, replacements from NAPA have been known to come with residual valves in both sides and your clutch will not work correctly with a residual valve. Why Chevy reversed it in their linkage assembly I have no clue.Last edited by Rufus; 10-15-2009 at 04:58 PM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-16-2009 08:41 AM #137
CHR Member
- Join Date
- Nov 2006
- Location
- tomball
- Car Year, Make, Model: 1930 sedan,1953 f-100,1950 sedan
- Posts
- 239
Cool project, always liked that coupe.Work is lookin good.
1930 model a , 1953 ford truck
"DOWN WITH THE SICKNESS"
-
10-16-2009 12:10 PM #138
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
Hey Rufus,
Originally Posted by Rufus
I did know about having to switch the internals around but I didn't know that about the Napa master cylinders. THANKS for the heads up as I will be paying more attention to this now!
Rick
-
10-16-2009 12:12 PM #139
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
Thanks Pro53! I am trying my best at getting this coupe just right. Rick Originally Posted by PRO53
-
10-17-2009 04:11 PM #140
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
Rear Window Installed
Today I finally finished installing the roll up rear rear window. This is the one thing that is different than the original coupe. The original coupe just a piece of plexiglass nailed to the wood during the filming of the movie and today there is nothing there. Well with this being said I thought that I should install the rear roll up window as to make it at least look 32 correct. Hope you enjoy the photos!
Rear Window Installed 001.JPG
Rear Window Installed 002.JPG
Rear Window Installed 003.JPG
Rear Window Installed 004.JPG
-
10-17-2009 04:17 PM #141
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
-
10-18-2009 06:29 AM #142
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
Just in case anyone wants a similar master cylinder but doesn't want to swap the innards side to side, International pickup trucks in the 60's used a very similar master cylinder and the brake and clutch ports are in the right place.
I'm using the Chevy one in my 27 but I flipped it around 180 degrees, so the clutch and brake are in the right ports. I'm sure some will say a single chamber master cylinder isn't safe, but I ran this one for 7 years and it was flawless. In fact I'm putting a new one from NAPA back in the rebuild I am doing on this car.
Don
-
10-19-2009 10:38 AM #143
CHR Member
- Join Date
- Feb 2007
- Location
- SLC
- Car Year, Make, Model: 52 Chevy 2-door Sedan w/ a 350/350 combo
- Posts
- 341
Don,
You just had to thrown in a pic of the PINK frame, didn't ya.
Pride Runs Deep
-
10-19-2009 12:17 PM #144
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
Well it is breast cancer awareness month!
breast-cancer-ribbonjpg.jpg
-
10-20-2009 06:54 PM #145
CHR Member
- Join Date
- Jul 2009
- Location
- Cocoa Beach
- Car Year, Make, Model: 98 Vette Daily Driver - Planning 32 3W
- Posts
- 92
Oh come on now. We know it is purple. But it is a good cause. I saw a bumper sticker that even my wife liked - Save the Taa Taas.“Ability is what you're capable of doing. Motivation determines what you do. Attitude determines how well you do it”--Lou Holtz.
-
10-23-2009 08:05 PM #146
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
Somethinf lurking in my garage
Something is starting to look pretty familiar out in my garage! I know I have seen this car somewhere before, I just can't put my finger on it. Maybe it was someplace called Paradise Road????
Wait till you guys see what I have in store for you tomorrow!!!!! 
Project Lurking 001.JPG
Project Lurking 006.JPG
Project Lurking 003.JPG
Project Bumper and Shocks 004.JPG
Graffiti Project 10-23-09 006.JPG
-
10-23-2009 08:30 PM #147
CHR Member
- Join Date
- Aug 2006
- Location
- Redmond
- Car Year, Make, Model: 1942 IH K3
- Posts
- 508
She is beauty.
-
10-24-2009 10:10 AM #148
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
Finally pictures taken outside
Well The sun is fianlly out the the weather is pretty damn nice so I figured I better get some photos of this project outside while I could. Enjoy!
Project 10-24-09 001.JPG
Project 10-24-09 002.JPG
Project 10-24-09 003.JPG
Project 10-24-09 004.JPG
Project 10-24-09 005.JPG
-
10-24-2009 10:13 AM #149
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
-
10-24-2009 10:15 AM #150
CHR Member
- Join Date
- Apr 2003
- Location
- Kansas City
- Car Year, Make, Model: 32 Ford 5-window
- Posts
- 181
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks for the inputs guys !
Exhsust system