Thread: I need a couple of opinions

Tweet

Originally Posted by 34_40

IC2, I have been thinking about using those to protect my 34 boards. Not sure how they would look but I like the protection angle. I also think they look better centered in the door and squared to the outer edge.

My .02 cents anyway!

Mike
Not sure how they would look on a post '32 car. Why not make up a facsimile out of wood or sheet metal before you spend $50 for the plates (or wander up to Ayer and see the LeBaron-Bonney folks - they might let you borrow a set to look at when the car is available)

Mine will be door opening centered and about an inch back from the edge - decisions have been made with a little help from my friends here!!!!!

What a PITA to put these things together - 2 sets of SS trim to get 1 good useable set for the 2 boards, a piece of SS from the Metals Supermarket, 2 sets of matting (the stickum and contact cement on the first set was no good) and some super sticky 2 sided tape. Needless to say, aftermarket stuff isn't always good Chinese quality - which is where it ALL came from.

That's a good idea on L.B., maybe they would let me set'em on the boards and get an idea of the look.

Glad to hear of your decision!

When it comes time to cover my boards I hope your around so I can pick your brain! LOL..

Mike