Quote Originally Posted by 34_40
IC2, I have been thinking about using those to protect my 34 boards. Not sure how they would look but I like the protection angle. I also think they look better centered in the door and squared to the outer edge.

My .02 cents anyway!
Mike
Not sure how they would look on a post '32 car. Why not make up a facsimile out of wood or sheet metal before you spend $50 for the plates (or wander up to Ayer and see the LeBaron-Bonney folks - they might let you borrow a set to look at when the car is available)

Mine will be door opening centered and about an inch back from the edge - decisions have been made with a little help from my friends here!!!!!

What a PITA to put these things together - 2 sets of SS trim to get 1 good useable set for the 2 boards, a piece of SS from the Metals Supermarket, 2 sets of matting (the stickum and contact cement on the first set was no good) and some super sticky 2 sided tape. Needless to say, aftermarket stuff isn't always good Chinese quality - which is where it ALL came from.