Thread: And more questions: Front suspension & clearance

Tweet

Looks like what you need is the SuperBell lower shock mount.

The one in the pic measures 1 3/8" from center of perch bolt bore to center of shock mount stud.

Be aware that these do not have a keyway on the perch bolt or internal protrusion on the lower shock mount proper.
I have seen them spun a few degrees, but drilling and tapping for a setscrew would take care of that problem.

The shock shown is a SoCal unit and measures 7 1/2" body length.
This is from the top of the shock body proper where the rod enters and the bottom of the shock body proper where it attaches to the lower ring and does not include the ring.