Thread: Quarter glass install

Tweet

I was thinking just to lay it on the glass under the trim molding and let the screws flatten it out, but maybe the thin 1/4" is best. You might have to put a short piece of clothes hanger wire in both ends to connect it or use a piece of a toothpick just to hold it in a circular shape until you can lock it down with the frame. Actually I have tried to make a window seal for a window over an air conditioner in my home using the method of splitting some 3/4" clear tubing and it really did not work well because it is difficult to split the tubing without some spiral contortions in the cut and then the split tubing does not fit well. Just lay the tubing on the glass and clamp it down with the frame and it should be a clean installation. If you only have thicker tubing you could split it if you have to.

P.S. you lucky dog with a coupe, I am going to freeze my afterparts as well as sinuses with a roadster!

Don Shillady
Retired Scientist/teen rodder