....I've got a 415 small block Chev thats been sitting in my back yard for 9 years. I will try to turn the motor over {by hand} this Sunday. If its not frozen up I've read where I should use an electric drill to circulate the oil thru the motor { put it in the distributor}. Can't I just do this by turning the crank with a socket? Sounds easier .... Also I read about putting Marvel Mystery oil in the plug holes. I sprayed WD 40 in the plug holes years ago. Oh, it has aluminum heads {if that matters}. Any imput on this would be great. Thanks a bunch, Bill.....