Thread: Cheap build whatcha think?
Threaded View
-
04-05-2019 12:04 PM #12
Use a straightedge stood up on its side and feeler gauges to find the piston compression height, then add that number to the thickness of the gasket. If this procedure is unclear, see the 9th photo from the top on this site.....
Checking and Setting Deck Height - Big Boyz Head Porting
Be sure to measure across the piston at the wrist pin to prevent the piston cocking in the bore and giving you an erroneous reading.
.Last edited by techinspector1; 04-05-2019 at 02:01 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! - -
John Norton aka johnboy