1Likes
Thread: Cheap build whatcha think?
Results 1 to 13 of 13
LinkBack URL
About LinkBacksHybrid View
-
04-05-2019 12:04 PM #1
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Use a straightedge stood up on its side and feeler gauges to find the piston compression height, then add that number to the thickness of the gasket. If this procedure is unclear, see the 9th photo from the top on this site.....
Checking and Setting Deck Height - Big Boyz Head Porting
Be sure to measure across the piston at the wrist pin to prevent the piston cocking in the bore and giving you an erroneous reading.
.Last edited by techinspector1; 04-05-2019 at 02:01 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy