3Likes
Thread: Start up 350 sbc
Results 1 to 10 of 10
LinkBack URL
About LinkBacksHybrid View
-
08-18-2017 02:39 AM #1
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
stop...... if this is a flat tappet cam, do not crank the motor, you will wipe off all the extreme lubricant and contribute to early failure. Remove the fuel inlet line at the carburetor and use a funnel and hose to fill the carb bowls with fuel. The battery should be fully charged, the carb should be full and the timing should be set so that the motor will fire off immediately and run between 2500 and 3500 rpm's for 30 minutes, WITH NO IDLING.
http://www.crankshaftcoalition.com/w...ips_and_tricks
.Last edited by techinspector1; 08-18-2017 at 02:43 AM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!