Thread: Crankshaft .060 oversize - is it good idea?

Tweet

Morning Pat---any snow??????????

I was just looking up the bearing numbers in 060 , you beat me to it---little sleepy yet, daylight saving time!!!!!!!!!!

Originally Posted by jerry clayton

Morning Pat---any snow??????????

I was just looking up the bearing numbers in 060 , you beat me to it---little sleepy yet, daylight saving time!!!!!!!!!!

hey jerry not much snow .wet and mud yep the Male/clevite book shows 060 evey one makes them and i think King or ACL go bit more on some engine then other s so many 350s out there they like to keep them cranks in service longer. for guys for in the states were getting a good 350 cranks that can be truned less then 30/30 like falling off a stump. we had a old steel crank in a bbc i did not want to throw it out or pay to get it welded so it was ground to the max guys that race it did not have any money . i could not grind it any more.so it would get the Hi spots belted off . use check it with both eyes shut block and crank came out of a scrap yard $40.for the454 block $25 for the454 steel crank . she is still working thats been over 20 years one of the best 468 i ever had