I have a 84 tbi engine and i was wondering if I can replace the OIL PAN gaskets with the motor in the car. The leak isnt bad, it looks like the wind is pushing a little thin line of oil the length of my pan --(from front to rear)




I know for sure there is enough clearance

So my question is......(if I buy the 4 peice gasket set)

how do i get the front and rear gasket to stay in place?

Permetex should keep the pans (side gaskets) in place.

Do i just stick the U shape gaskets on the pan and push it up?


Or do I stick the front gasket in the timing chaincover and push the pan up?

Im confused

can some body give me simple instructions on how to change the oil pan gasket ****not the one peice seal****







.