Thread: rocker arm/stud questions
Results 1 to 3 of 3
LinkBack URL
About LinkBacksThreaded View
-
12-16-2010 01:05 AM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
for mild use 3/8 are fine for most all builds . soild roller with hi spring pressure then 7/16 top and bottom stud. if your buying all new rockers and heads are set up for screw in studs then the heads will be tap for 7/16. the bigger 7/16 are fine bigger from the start it will not cost more .if heads are stock gm and your cut them for screw in studs and your using old rockers then a 7/16 bottom stud and a 3/8 top is what you need and ARP and others make themLast edited by pat mccarthy; 12-16-2010 at 01:10 AM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
time for a new forum to visit. when they sold sr.com it went down hill fast. no more forum just a cheap site selling junkie cars. the canadians killed hr.com. mods are real pricks. as with any site...
Where is everybody?