Thread: Comp Cams Magnum Camshaft

Tweet

FMX
Looks like you've made some good choices.
I ran that same cam some years ago and loved it.
And I also used the Rhoad lifters and they worked great as well.
I did however have to put about a 2200 stall in it.
It was just a little to much cam for the stock converter.
But what a great pulling cam, You'll enjoy it.
I had ran the weind duel plan manifold that was port matched
to the heads and a 780 holley mech. carb and headers. Kurt

I would save the money on the Rhoads lifters and go with the Comp ones. The cam sounds good for your app. Edd

That is a good cam-also the extreme energy 268 is good-great sound and it works good. Forget about the rhoads, they tend to be noisy.

What do you guys think about the Edelbrock Performer RPM cam and lifter kit? I am running their Edelbrock RPM manifold which I hear is great and see that it is very cheap. Will running a stall and such hurt milage? That is one of the biggest things I am worried about.