Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 350 chev streetable engine build
          
   
   

Results 1 to 15 of 26

Threaded View

  1. 05-12-2009 06:32 AM #8
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by TO-FAST-4U View Post
    looks like you have some good parts all ready use them and save some money . most all them vortec heads are cracked in the junk yard . and the new ones need lots of work to be used on a hot rod . don't wast you time and money on vortec junk heads .
    i have check many of them heads .the way i see it. is there are the ones that are crack and the ones that are going to crack so? i have been told that they did rework the casting ? there will be work to make them work like the intake bolt hole two on each end .as well as spring studs milling them could need guids new valve there not that cheap in the long run .they are a weak casting off the bat that could crack when all done .i just buy the after market casting
    Last edited by pat mccarthy; 05-12-2009 at 04:32 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink