Welcome to Club Hot Rod! The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.

» Members from all over the US and the world!
» Help from all over the world for your questions
» Build logs for you and all members
» Blogs
» Image Gallery
» Many thousands of members and hundreds of thousands of posts!

YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show

Thread: 305 stroker with 3.750 crank

       Tweet

Results 1 to 15 of 15

LinkBack
- LinkBack URL
- About LinkBacks
Thread Tools
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

02-15-2009 03:53 PM #1

305racer
CHR Member

Join Date

Feb 2009

Location

North Las Vegas

Posts

8

305 stroker with 3.750 crank

305 stroker with 3.750 crank. has anybody done this and what clearance issue's are there. How much massaging is needed to clear block, counter weights, rod bolts or cam.

Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

New Forum Posts
- Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
  
  MSD 8360 distributor vacuum advance
  
  Today, 09:30 AM
- Not sure on the MSD Distributor, but most of the old school factory vacuum advance units could be tailored for the amount of vacuum required to start moving the advance arm. The adjustment was thru...
  
  MSD 8360 distributor vacuum advance
  
  Today, 08:44 AM
- I got SWMBO to help me put in a new board fence around our new section. I gave her the new hammer, told her that I would hold the board and when I nodded She was to hit it. I don't remember much...
  
  the Official CHR joke page duel
  
  Yesterday, 08:18 PM
- JB's voltage tester... - -
  
  the Official CHR joke page duel
  
  Yesterday, 07:33 PM
- Ever since putting 2.02 camel humps on my 350, as I am cruising there is a slight surging in the engine. If I put my foot in it to give it load it is smooth as can be. Have done many different timing...
  
  MSD 8360 distributor vacuum advance
  
  Yesterday, 02:31 PM
Everywhere sidebar 1.4.1

Powered by vBulletin™ Version 4.1.3
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.
Content Relevant URLs by vBSEO 3.6.0
Tabs System by vbSoporte - vBulletin en Español
vBulletin Styles developed by vBStyles.com

All material found at Club Hot Rod are copyright protected

Links monetized by VigLink