i'm building a sbc 350 and have a couple of questions. i want at least 400 horses out of this project, so first off are the heads, i have an option for (casting number: 10110810) Gen 1. 65cc chamber heads, or (casting number 14102187) 1.84"/1.5" valve. which would be the best to use?? next is intake, i have a edelbrock performer 2101, but i dont think it will bolt up, even if it would, would it be a good choice to use it?? and final is cam, i have an xe 286h comp cam. which setup would be best for this build, with spending the least amount of money?? and suggestions, be my guest!! thanks, crazy