Thread: any suggestions???

Tweet

Kitz has the correct answer for you. Check out these 108 combinations. They are all built for the street with pump gas friendly static compression ratios. Build for the highest torque at the lowest rpm for a good street motor. Click in the orange area at the bottom of the page for the next group of combinations......
http://www.ryanscarpage.50megs.com/combos1.html

The 10110810 is probably a swirl port truck head and is not the head you want to start with if you intend to make any power over 4,500 rpm's. Same with the 14102187, 305 heads.

If budget is a problem, search the boneyards for a '96-'98 truck with Vortec 350 motor. These will have the L31 Vortec heads that will make pretty good power. Use a Performer Vortec manifold with them. They use rail type rocker arms, so get the rockers with the heads. Look for a sawtooth design on the end of the head and the casting number 12558062 under the valve cover.