Thread: 350 build-up question heads?cam?fuel injection?

Tweet

Thanks. I may get the edelbrock heads and FI and already have the rpm cam, and edelbrock says it's a nicely matched combo and should have some balls, but a nice driver.

I am still open for other ideas, especially the heads/cam, but I really want the fuel injection. For only a few hundred more dollars, I could get a different cam(not sure which one, and the dart pro1 heads, which I was told will outperform the rpm heads by quite a bit. Not sure what to do, it will be over a month till I order parts. keep the ides coming. thanks all!!!

The best flowing heads on the market are made by AFR. Their 180 heads would work great on your 355. Check them out at www.airflowresearch.com/180sbc_sh.php.

Originally Posted by rumrumm

The best flowing heads on the market are made by AFR. Their 180 heads would work great on your 355. Check them out at www.airflowresearch.com/180sbc_sh.php.

I will second this.
If I want to build a 400 to 425 hp 350/383 these would be my first choice.