chevy aluminum heads

[demetrice askew]

Do anybody know anything about them procomp heads they sell on ebay my friend have a set of them 190cc 64cc that he want to sell me 4 600.00 they have not been put on the motor.OR they any good. THANKS

[erik erikson]

Do anybody know anything about them procomp heads they sell on ebay my friend have a set of them 190cc 64cc that he want to sell me 4 600.00 they have not been put on the motor.OR they any good. THANKS

I hope you mean $460.
Make sure you find out what valve springs they have if they are assembled.
One of the biggest problems they have are casting's are a little rough and needing some clean up in the bowl area and port area.
I have done 495 hp with these heads in a pump gas engine with a hyd. roller cam.

[demetrice askew]

They are assembled i wanted to put them on the 400 i got i was going to put the big springs on them for my roller cam

[erik erikson]

They are assembled i wanted to put them on the 400 i got i was going to put the big springs on them for my roller cam

Just make sure you have the right springs.
On your cam card they should give the spring number.

[demetrice askew]

ok i got the cam kit