Thread: chevy aluminum heads
Hybrid View
-
09-18-2007 04:51 AM #1
chevy aluminum heads
Do anybody know anything about them procomp heads they sell on ebay my friend have a set of them 190cc 64cc that he want to sell me 4 600.00 they have not been put on the motor.OR they any good. THANKSmeat1037
-
09-18-2007 05:09 AM #2
Originally Posted by demetrice askew
Make sure you find out what valve springs they have if they are assembled.
One of the biggest problems they have are casting's are a little rough and needing some clean up in the bowl area and port area.
I have done 495 hp with these heads in a pump gas engine with a hyd. roller cam.
-
09-18-2007 05:12 AM #3
They are assembled i wanted to put them on the 400 i got i was going to put the big springs on them for my roller cammeat1037
-
09-18-2007 05:16 AM #4
Originally Posted by demetrice askew
On your cam card they should give the spring number.
-
09-18-2007 05:18 AM #5
ok i got the cam kitmeat1037
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel