Do anybody know anything about them procomp heads they sell on ebay my friend have a set of them 190cc 64cc that he want to sell me 4 600.00 they have not been put on the motor.OR they any good. THANKS
Printable View
Do anybody know anything about them procomp heads they sell on ebay my friend have a set of them 190cc 64cc that he want to sell me 4 600.00 they have not been put on the motor.OR they any good. THANKS
I hope you mean $460.Quote:
Originally Posted by demetrice askew
Make sure you find out what valve springs they have if they are assembled.
One of the biggest problems they have are casting's are a little rough and needing some clean up in the bowl area and port area.
I have done 495 hp with these heads in a pump gas engine with a hyd. roller cam.
They are assembled i wanted to put them on the 400 i got i was going to put the big springs on them for my roller cam
Just make sure you have the right springs.Quote:
Originally Posted by demetrice askew
On your cam card they should give the spring number.
ok i got the cam kit