Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Used solids for checking p/v clearance??
          
   
   

Reply To Thread
Results 1 to 8 of 8
  1. #1
    jimmyjeep is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2006
    Location
    west olive
    Car Year, Make, Model: 1997 S-10 357c.i.
    Posts
    225

    Used solids for checking p/v clearance??

     



    If I try to get my hands on a set of used solid lifter to check piston to valve clearance, I figured since you have to check to the outside of the "crown' anyway, there shouldn't be a problem. Is there??
    "oohh...thats gonna leave a mark!"

    1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears

  2. #2
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    just use light test valve springs you do not need to use a soild you could if you want but there is no need

  3. #3
    jimmyjeep is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2006
    Location
    west olive
    Car Year, Make, Model: 1997 S-10 357c.i.
    Posts
    225

    Thanks Pat, I have a set of 882 head, springs that have about 100,00 miles on them, will those work you suppose.??? They should be worn a little. I have 1.6 rollers with a .480 lift CompCams cam to check. The heads are 462's @61cc's. with a .550 lift springs. Will the 882 bind before I can get a good reading??
    "oohh...thats gonna leave a mark!"

    1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears

  4. #4
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    no just a spring that is very light like .060 wire and about 10 /20 lbs that all you need . can find some thing at a hard ware store

  5. #5
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    look at www.goodson.com part vts-8

  6. #6
    jimmyjeep is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2006
    Location
    west olive
    Car Year, Make, Model: 1997 S-10 357c.i.
    Posts
    225

    Thanks, that makes things easy!
    "oohh...thats gonna leave a mark!"

    1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears

  7. #7
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    yes this is how i do them with the setup lite test springs

  8. #8
    jimmyjeep is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2006
    Location
    west olive
    Car Year, Make, Model: 1997 S-10 357c.i.
    Posts
    225

    Hey Pat do you know the answer to the felpro head gasket question i just posted on the board?
    "oohh...thats gonna leave a mark!"

    1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink