If I try to get my hands on a set of used solid lifter to check piston to valve clearance, I figured since you have to check to the outside of the "crown' anyway, there shouldn't be a problem. Is there??
Printable View
If I try to get my hands on a set of used solid lifter to check piston to valve clearance, I figured since you have to check to the outside of the "crown' anyway, there shouldn't be a problem. Is there??
just use light test valve springs you do not need to use a soild you could if you want but there is no need
Thanks Pat, I have a set of 882 head, springs that have about 100,00 miles on them, will those work you suppose.??? They should be worn a little. I have 1.6 rollers with a .480 lift CompCams cam to check. The heads are 462's @61cc's. with a .550 lift springs. Will the 882 bind before I can get a good reading??
no just a spring that is very light like .060 wire and about 10 /20 lbs that all you need . can find some thing at a hard ware store
look at www.goodson.com part vts-8
Thanks, that makes things easy!
yes this is how i do them with the setup lite test springs
Hey Pat do you know the answer to the felpro head gasket question i just posted on the board?