Thread: need help pickin out heads

Tweet

Originally Posted by ONyX

Hey guys, Im looking at getting a new set of heads and would like a second opinon. Heres my setup

SBC 383 9.017 Deck hight
flat top 5cc valve releifs
Scat rods(5.7) and crank
Holley 4779 750 2X pumper
Edelbrock Performer RPM air gap
Edlelbrock Performer RPM CAM (234/244 @ 0.05, 0.488/0.510 112 lobe sep, 110 int CL)
MSD 6AL
HEI Dist

Im looking to run on 91 octain cause thats all I can get unless I drive an hour away. My headers are for regular port not D, Unless you can use reg headers on D port. I dont want to buy new headers.
Im looking at the Dart Pro 1 200cc, there in my price range ~1200.00 I would love the new AFR Elim's but dont have the $ for that. Plus I think there D-port. Also the Trick Flow 195 look nice but again there D-Port. Its all in a 68 camaro with a TH400 and 4.10's soon to be 3.55's. Any help would be great thanks guys.

A good cast iron head would be a ported 180 cc Dart head.

If you are looking for big power the AFR Eliminators would be the way to go. Although it looks like you aren't using a very big cam so other heads might fit your build better.