ok hear we go
71 chevelle no power brakes

th350 full manual valve body

8.5 10 bolt posi 3:08 gears(i think) want to go to 3:73's

im looking at an nice b&m hole shot converter 3000

i would like pump gas only lookin for about 450 its just stock rods an crank

gonna get a set of DART IRON EAGLE Platinum heads probly the 180's will have 9.1:1

carb will be a 750 holley

not sure what intake (any ideas)

cam i was thinking of
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 2,300-6,500 RPM
Intake Duration at 050 inch Lift: 240
Exhaust Duration at 050 inch Lift: 246
Duration at 050 inch Lift: 240 int./246 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 296
Advertised Duration: 284 int./296 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.507 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.507 int./0.510 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.

exhaust is hooker comp headers with 2.5 into an xpipe then 2 flowmaster 40's just dump off no tails

ignition msd hei with 6al box