Chevy 302

Quote:

---

Originally Posted by DennyW

I think I found one !! 2-12,000 rpm's. :LOL:

Oh, the specs, can't forget that !! :LOL:

Specifications
Stock Number: OSMG0872
Displacement: 0.702 cu in (11.5 cc)
Bore: 1.02 in (26 mm)
Stroke: 0.87 in (22 mm)
Practical rpm: 2,000-12,000
Output: 1.1 hp @ 11,000 rpm
Weight: 20.3 oz (580 g)

---

Bad Denny.
Now you did it.
IT IS ON AGAIN!!**)

I could be wrong but, today I don't think you will hear of too many SBCs that go beyond 10,000-10,500, and live very long.

Quote:

---

Originally Posted by HOTRODPAINT

I could be wrong but, today I don't think you will hear of too many SBCs that go beyond 10,000-10,500, and live very long.

---

HE IS GOING TO MAD.
I WISH YOU HAD NOT SAID THAT!!:whacked:

Haven't you all missed this thread?:)

Quote:

---

Originally Posted by gschuld

Haven't you all missed this thread?:)

---

NO,NOT REALLY!!!:D

Just think of all the people that now feel the need to read the first 14 pages just to find out what all this is about. :3dSMILE:

Quote:

---

Originally Posted by Dave Severson

small, underpowered, usually painted orange. Heads are good boat anchors for anything in the 20-28 foot range, blocks are adequate as anchors for 24-32 foot houseboats....

---

I don't care who you are, now that's funny! :LOL: :LOL: I had one in a 73 Chevy truck. I'd take all the old waste oil from when my dad changed oil in the other cars and dump it in my 307 to keep it going. Great way to recycle!:LOL:

Come on Erik, secretly you must be amused by this. Denny's motor had to get a chuckle out of you. That was damn funny! Score 1 for Denny!

".... Pro Stock engines can also be no larger than 500-cid, and each car can weigh no less than 2,350 pounds, with driver. A competitive Pro Stock engine produces more than 1,350 horsepower and revs to more than 10,500 rpm. "

Quote from the Jeg's racing website.

Now if it can be done reliably by a big block why can't Scooter's small block go to 12k?:HMMM:

Or is this not a question of : can it be done now, but could it have been done then?

!!!!I'm so confused!!!!!:confused:

41Willys,

To get up to speed about the 12,000rpm thing, I'd start on page 6 at about post #83. A good read!

Hey you silly B-----d where are you? You just can not keep from trying to stick your finger in Albert the alligator's a--hole can you? Watch out guys, George has the determination to shove a snowball up a leopards butt with a red hot poker. He won't let this thread die. I might possibly start thinking this thread was a bad idea............Burt.

Damn it ...where did that leopard go!!

This thing is melting fast!

Quote:

---

Originally Posted by DennyW

That's the purpose of a club, sit around and talk to each other. Besides, it's like reading a short book. :LOL: :LOL:

---

Uhmmm, a short bad book maybe. :)

Kitz

I just gotta know. It can all go away as soon as we can all see those specifications of scooter's buddy's homebuilt sbc that is still in it's powerband at 12,000+rpms. We were promised specs ...we've been patient ...it's been just past 7 months now.

...my butt sheeks are all puckered up in anticipation and excitement. :)

George

Hey, if you are in town let me know. Making some good food tonite. Burt.

P.S. Jeb misses spooning with you.