Thread: Are there better motor mounts than stock?

Tweet

Yeah, what Mike said. If you can't find the good mounts with the interlocking metal on each bolt flange, then there's always the old street racers trick of drilling two 5/16" holes through the mounts, install a bolt with a self locking nut tight enough to hole the pieces together, but still loose enough to allow the rubber to absorb some of the vibration....

Originally Posted by Dave Severson

Yeah, what Mike said. If you can't find the good mounts with the interlocking metal on each bolt flange, then there's always the old street racers trick of drilling two 5/16" holes through the mounts, install a bolt with a self locking nut tight enough to hole the pieces together, but still loose enough to allow the rubber to absorb some of the vibration....

Nice trick, thanks.