Thread: 383 LT1 roller motor
-
10-19-2006 03:06 AM #1
383 LT1 roller motor
I posted i had oil coming out of my breather seems when i assembled the engine i should have fitted a restrictor kit in the rear.
Anyways what ive done is fit a different breather which is clamped onto a tube that fits the grommet.
No more oil coming out.
The motor has a pcv valve, not fumey.
It worked.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project