Thread: how much power should my combo make?

Tweet

Will the above setup with the XE274 work good with my T-56 6 speed? I have no idea how that works out....I mean in an auto you get a bigger stall so in a standard do you have to slip it alot to take off normal?

I suggest you get pretty stout pressure plate and clutch disc and a scattershield. Clutches have a nasty habit of blowing and without protection they can do a lot of damage, like taking part of your foot off.

that wouldn't be very fun

Anybody know where I can get a good clutch for less that $450? The ones I have found were really expensive.

Could I just run the stock clutch for now and be ok as long as I don't race it or rev really high? What exactly causes them to blow...the pressure or the rpm's?

Thanks for the help

Uhhh.......Can you get your feet or legs replaced for less than $450???

One mistake could be with you the rest of your life. Also, what's cheaper? Buying what you need the first time, or buying something a few bucks cheaper and then buying what you need later? Opt for safety, even if it hurts your wallet.

Oldman2

What used to be is no more, and probably never was.

Originally Posted by oldman2

Uhhh.......Can you get your feet or legs replaced for less than $450???

One mistake could be with you the rest of your life. Also, what's cheaper? Buying what you need the first time, or buying something a few bucks cheaper and then buying what you need later? Opt for safety, even if it hurts your wallet.

Oldman2

What used to be is no more, and probably never was.

lol yeah that's true
I might be able to get a wooden peg leg for less than $450 but I probably wouldn't like it

Aye, matey. Along with an eyepatch and a parrot. And what if you get termites?

Oldman2