Results 1 to 15 of 22
LinkBack URL
About LinkBacksHybrid View
-
04-30-2006 05:39 PM #1
CHR Member
- Join Date
- Nov 2004
- Location
- ada
- Car Year, Make, Model: 62 bird, 47 chevy coupe, 54 chevy truck
- Posts
- 21
complete cam figures? I thought I posted everything?
I wanted to get around 400-425hp, am I expecting to much out of these parts?
-
04-30-2006 07:06 PM #2
CHR Member
- Join Date
- Mar 2006
- Location
- Durham
- Car Year, Make, Model: 78 Cutlass
- Posts
- 33
350
Actually, you're expecting a lot out of 350 inches. Your parts look good but to get 425 HP from 350ci means you'll have to spin it harder. 224 degrees will run out @ about 5500 rpm's. If those are the RHS 200's, they will support more rpm's and be able to take advantage of more cam. Just be realistic about your intended usage of the vehicle and the idle quality. I would get a stroker crank(they're cheap nowadays). 425 HP from 383ci is much easier without needing so many rpm's."It may be ugly, but it's SLOW!"
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy