Originally posted by techinspector1
COOL RUNNING

Hot weather, towing or intense, low-speed wheeling can overpower your stock water pump, especially if your 4x4 mill has been performance-tweaked. But Milodon High Volume Water Pumps and Milodon 160-degree High Flow Thermostats are designed to provide a one-two punch to knock out GM V8 overheating problems for less than a hundred bucks. The water pump (part number 16210) and thermostat (part number 16400) were used in this test. Ford and Chrysler applications are slightly more expensive.

After the engine is cool, the coolant is drained and saved by disconnecting the lower radiator hose. Then the engine accessories in the way of the water pump are removed. Tech tip: It's easiest to loosen the fan hub/pulley bolts before taking tension off the fan belt.

Removing the old pump with the lower radiator hose still attached makes it a snap to position the hose correctly on the replacement pump. According to Milodon, the High Volume Pump helps prevent steam pockets and hot spots in the engine block by increasing coolant flow up to 30 percent. The pumps feature large-diameter shafts and heavy-duty bearings.

As promised, this Milodon High Volume Water Pump was a direct bolt-in replacement on this Chevy Small Block. New gaskets are supplied, but you need to supply the RTV. Milodon's 160-degree High Flow Thermostat was also a quick drop-in. According to the company, the unit features a Balanced Sleeve design made to work well with the increased flow of the High Volume Water Pump.

Sure enough, after reinstalling all the accessories, refilling the coolant and double-checking all the hose connections, the Small Block V8 ran 20 to 25 degrees cooler around town as compared to the old stock pump and thermostat. Now we can't wait to hit the trail for a thorough field test.

http://www.milodon.net/main.htm

tech you didn't say if this was round track info. or st. that would be nice around town, but on a round track, where you adv.5,000 rpm's, they are two dif. things. we cut some of the blades out of the pump, or slow the pmp down, to decrease the water flow, not increase the flow. the thermostat should work. wouldn't want toad mountain to go buy that pump for a round track car.