Thread: Would it work?
Results 1 to 6 of 6
LinkBack URL
About LinkBacksThreaded View
-
01-27-2006 02:33 PM #4
CHR Member
- Join Date
- Feb 2004
- Location
- Tucson
- Car Year, Make, Model: 39 Ford Coupe, 32 Ford Roadster
- Posts
- 2,334
What is your emissions criteria? I used a new Vortec 350 engine assembly with an Edelbrock performer, Jet-built Q-jet carb and a ZZ HEI and the thing zeroed both hydrocarbon tests and zeroed one CO measurement and had ..01% on the other. This was with headers and a single GM cat.
Your state probably has different criteria for different year vehicles. A new engine (after initial burn-in) may do pretty well.
On another vehicle, I was able to rejet the Holley to pass....didnt run it that way except to the emissions test and back.
mike in tucsonLast edited by robot; 01-27-2006 at 03:37 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!