The short answer is it can be made to run almost as well and in some cases better depending on the manifolds and carbs you are comparing. Key points will be carb sizing, jetting and linkage setup.

This subject has been pretty extensively covered in the
past.

http://www.clubhotrod.com/forums/sho...threadid=21260

http://www.clubhotrod.com/forums/sho...threadid=20125

http://www.clubhotrod.com/forums/sho...threadid=20854

http://www.clubhotrod.com/forums/sh...&threadid=13948 (Page 2 covers Carb Mods)

http://www.clubhotrod.com/forums/sh...&threadid=12288

http://www.clubhotrod.com/forums/sh...=&threadid=9262

http://www.clubhotrod.com/forums/sh...=&threadid=7704

http://www.clubhotrod.com/forums/sh...=&threadid=7436


Happy reading