Hello All

I would like to have some help in a decission on what type of heads and camshaft combo that will work.

383 cuin

Enigine 350 2 bolt block -74 030 bore

4bolt splayed caps.

Crankshaft 3.75 stroke and 5.7 Hbeam rods.

SRP dome pistons ( 12.9:1 with 64cc heads )

My goal is 650 HP below 7500rpm

If it will work with 23degree heads i would be glad ( beacause its cheper)

And to the MekRollCam it should have a lobe spearation of 110 or greater because i would want to spray i with a small amount of N2O

will this work... Canfield 220cc heads with 65cc CNC chamber and a Compcams 12-817-9 camshaft ( lift in .739 ex .693 dur in 274 ex 282 lobe sep 112 deg )

/ Mattias