Results 1 to 9 of 9
LinkBack URL
About LinkBacksThreaded View
-
10-14-2005 08:14 AM #1
CHR Member
- Join Date
- Mar 2005
- Location
- :)
- Posts
- 84
Head Help
I have a .030 over 350, forged crank, rods, and pistons, 750 eddy carb, weiand x-cellerator intake, magnum 292h cam, and 1.52 roller rockers to start with.
My question is about some good cast iron heads such as world products or dart, when I order the heads what size should I get the runners to keep decent torque down low??? 165, 170, 180, 190, etc etc. I will also have a 2400 stall on a build turbo 400 with a 3.73 posi rear.
Which heads would you recommend, doesn,t have to be dart or world, I would preffer some cast ones though.
Would Dart Iron Eagles with 180cc runners be fine?
Any guestimates for horsepower or torqueof engine finished?Last edited by dcurtis; 10-14-2005 at 08:42 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
It would be nice if this up and down crap would cease.
Back online